Group Descriptor Programming - Samsung ER-550 Operator's And Programming Manual

Group Descriptor Programming

Ten group totals (0-9) are available to summarize department sales. Group totals appear on reports,
so that you can track sales of different types of items. The group descriptors programmed here will
replace the default descriptors GROUP0 through GROUP9 that appear on reports.
1. At the PROGRAM control lock position menu, press 8 for GROUP DESCRIPTOR. The
GROUP DESC. PROG. screen displays.
2. Program a descriptor up to 12 characters long for each group.
descriptor, press the
corresponding
number from the
10-key pad. If
necessary, press the
same key again to
advance to the letter
you wish to use.
After you select
each letter, press
ENTER (CASH
TEND). See "How
to Enter Descriptors
in Program Mode"
on page 26 for more
information.
3. After making new entries or changes, press the CLEAR key to finalize and return to the
PROGRAM MODE screen.
120  Programming Instructions
GROUP DESC. PROG.
To enter a
GRP 0:
GRP 1:
GRP 2:
GRP 3:
GRP 4:
GROUP DESC. PROG.
GRP 5:
GRP 6:
GRP 7:
GRP 8:
GRP 9:

Press ENTER to
advance the
arrow to the next
group.
Press
PAGE DOWN
to view the
second Group
Desc.
Programming

screen.
Press PAGE Up
once to return to
the first group
on the screen.
Press PAGE Up
again to return
to the previous
screen.
Samsung ER-550 Electronic Cash Register