Clerk Operations - Samsung ER-550 Operator's And Programming Manual

Clerk Operations

The ER-550 can track sales for up to 20 clerks.
You can choose a push button or code entry clerk system:

The simplest clerk system is the push button system. This is also the default system; the register
will operate this way unless it is programmed otherwise. You simply press the CLERK # key to
sign on or sign off the clerk. You can operate only one clerk when you choose this method.

You can provide maximum security in a multiple clerk system with the code entry system. Press
the CLERK # key, enter the clerk secret code, then press the CLERK # key, or enter the clerk
secret code, then press the CLERK # key to sign on the register.
You can also select stay down or pop-up mode for clerk operation:

Stay down means that once a clerk is signed on, the same clerk will remain signed on until a
different clerk signs on or the original clerk signs off. A stay down clerk system might be used
when only one operator uses the register at a time, and a different operator begins when a work
shift is changed.

Pop-up means that the clerk is automatically signed off an the end of each transaction. Therefore,
to begin a transaction, you must first sign a clerk on. A pop-up clerk system might be used in a
department store, where several clerks might use the register during the same shift and clerk sales
information is required.
See "Clerk Programming" on page 118 to set clerk options.
Samsung ER-550 Electronic Cash Register
Operating Instructions  31