S-Mode Set-Up - Samsung ER-4915 Programming Manual

S-Mode Set-Up

Self Tests
Function
Initialize
Memory All Clear
Reset All Totals
& Counters
Reset Grand
Total Only
Printer & Display
Test
Keyboard Test
Keylock Test
EPROM Check
Sum
Setting the
Number of
Departments
NOTE: The ER-4915 may be initialized (Initial
Cleared) at any time. The Initial Clear proce-
dure may be used to clear keyboard lock-ups
and constant error conditions. An Initial Clear
will not affect register programming or clear
previously stored totals from memory. How-
ever, an Initial Clear will cause balancing
discrepancies if performed in the middle of a
transaction.
The Service mode (S-Mode) position is at "6 o'clock" on the
keylock. It is not labeled, and can be accessed only by the "C" key.
See the above illustration.
ER-4915 Dealer Pocket Programming Guide
Keylock Position
P-Mode
"C" key to the
S-Mode position
"C" key to the
S-Mode position
"C" key to the
S-Mode position
"C" key to the
S-Mode position
"C" key to the
S-Mode position
"C" key to the
S-Mode position
"C" key to the
S-Mode position
S-Mode Programming
"C" key to the
S-Mode position
Key Sequence
Power up machine while holding down the
"SUBTOTAL" key.
Power up machine while holding down the "00"
key.
Power up machine while holding down the
"CHECK" key.
Power up machine while holding down the "CASH
TEND" key.
Enter 1 and press the "CASH TEND" key.
Enter 2 and press the "CASH TEND" key. Exit
test mode by pressing the "CLEAR" key twice.
Enter 3 and press the "CASH TEND" key. Rotate
the "C" key to all keylock positions.
Enter 4 and press the "CASH TEND" key.
Enter the number of Departments (5, 10, or 15),
press the "X/TIME" key, and "CASH TEND" key.
OFF
VOID REG
P
S
X
Z
5