Dvi-D Connector (Optional); Kb/Ms Connector - DFI PIC-Q170 User Manual

DVI-D Connector (optional)

DVI-D
2
1
The DVI-D connector is used to connect a digital LCD monitor or LCD TV. Connect the display
device's cable to the connector.
BIOS Setting
Configure the display devices in the Advanced menu ("Video Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to the chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2
30
29

KB/MS Connector

The Keyboard/Mouse connector is used to connect PS/2 keyboard and PS/2 mouse by means
of a PS/2 cable.
Connecting the PS/2 Cable
The system board package comes with a PS/2 cable. Connect one end of the cable to the KB/
Mouse connector. The other ends are used to connect a PS/2 keyboard and a PS/2 mouse.
PS/2 mouse port
PS/2 keyboard port
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power-on the system.
21
KB/MS
1 2
MSCLK
KBCLK
MSDATA
KBDATA
GND GND
GND
KBMS POWER KBMS POWER
9 10
Connect to the
board's KB/Mouse
connector
www.dfi .com