Xirrus Wi-Fi Array XN16 User Manual page 249

Wi-Fi Array
WEP Settings
These settings are used if the WEP encryption type is selected on the SSIDs >
SSID Management window or the Express Setup window (on this window,
encryption type is set in the SSID Settings: Wireless Security field).
Key Mode / Length: If you enabled WEP, choose the mode (either ASCII
8.
or Hex) and the desired key length (either 40 or 104) from the pull-down
lists.
Encryption Key 1 / Verify Key 1: Enter an encryption key of the length
and type selected (to the right of the key fields):
• 10 hex/5 ASCII characters for 40 bits (WEP-64)
• 26 hex/13 ASCII characters for 104 bits (WEP-128)
Re-enter the key to verify that you typed it correctly. Hexadecimal
characters are defined as ABCDEF and 0-9. For ASCII mode, you may
include special characters, except for the double quote symbol (").
9. Encryption Key 2 to 4/ Verify Key 2 to 4/ Key Mode/Length (optional): If
desired, enter up to four encryption keys, in the same way that you
entered the first key.
10. Default Key: Choose which key you want to assign as the default key.
Make your selection from the pull-down list.
11. Click on the Apply button to apply the new settings to this session, or
click Save to apply your changes and make them permanent.
#
After configuring network security, the configuration must be
applied to an SSID for the new functionality to take effect.
See Also
Admin Management
External Radius
Internal Radius
Access Control List
Management Control
Security
Configuring the Wi-Fi Array 227