Xirrus Wi-Fi Array XN16 User Manual page 220

3. Local File Size (1-500): Enter a value in this field to define how many
Syslog records are retained locally on the Array's internal Syslog file. The
default is 500.
Primary Server Address (Domain or IP): If you enabled Syslog, enter the
4.
domain name or IP address of the primary Syslog server.
5. Secondary/Tertiary Server Address (Domain or IP): If you enabled
Syslog, you may enter the domain name or IP address of one or two
additional Syslog servers to which messages will also be sent. (Optional)
6. Email Notification: The following parameters allow you to send an email
to a designated address each time a Syslog message is generated. The
email will include the text of the Syslog message.
a. Email SMTP Address (Domain or IP): The domain name or the IP
address of the SMTP server to be used for sending the email. Note
that this specifies the mail server, not the email recipient.
b. Email SMTP User/Email SMTP Password: Specify a user name and
password for logging in to an account on the mail server designated
in Step a.
c. Email SMTP From: Specify the "From" email address to be displayed
in the email.
d. Email SMTP To: Specify the entire email address of the recipient of
the email notification.
7. Syslog Levels: For each of the Syslog destinations, choose your preferred
level of Syslog reporting from the pull-down list. Messages with
criticality at the selected level and above will be shown. The default level
varies depending on the destination.
a. Console Logging: For messages to be echoed to the console, the
default level is Critical and more serious. This prevents large
numbers of non-critical messages from being displayed on the
console. If you set this level too low, the volume of messages may
make it very difficult to work with the CLI or view other output on
the console.
198
Wi-Fi Array
Configuring the Wi-Fi Array