Page 1
Wireless Access Point X2 Series Quick Installation Guide XD4 Series September 25, 2015...
Page 2
Xirrus, Inc. All other trademarks and brand names are marks of their respective holders. Please see Legal Notices, Warnings, Compliance Statements, and Warranty and License Agreements in the Xirrus Wireless AP User’s Guide. All rights reserved. This document may not be reproduced or disclosed in whole or in part by any means without the written consent of Xirrus, Inc.
APs deliver robust wireless connectivity. The X2-120 has two Wave 1 radios. The X2 Series includes the X2-120 (Model X2120). The XD2 Series includes the XD2-240 (Model XD2240). This Guide covers the steps required to install and start X2 APs.
X2 Two-Radio Access Points Access to a Web browser to configure the AP via the Xirrus Management System (or for the XD2 only, directly via the AP’s Windows Management Interface - WMI). For a suspended ceiling mount, you need a 7/16” nut driver to attach the mounting plate to the T-Bar clips.
X2 Two-Radio Access Points Install Mounting Hardware 3A—Ceiling Mount 3C—Wall Mount with Bracket 3B—Ceiling Grid Mount with Mounting Plate 3A—Ceiling Mount We recommend use of the supplied AP mounting plate, which offers a more secure mount and ease of dismount. Remove the mounting plate from the back of the AP (push it against the AP and twist it to the left).
Connect the cable that carries power and data to GIG1/POE (shown in red). If you use a Xirrus-supplied injector, its CONNECT LED should light (for 70W and higher injectors, it is OK if it blinks). If power is being properly supplied, the...
Most customers employ the Xirrus Management System (XMS) for the initial setup and continuing management of Xirrus devices. XMS users can readily set up their new devices for provisioning and ongoing maintenance via the following platforms. Newly discovered APs are automatically assigned to the XMS “default” profile, and will receive the configuration defined for that profile.
Need help?
Do you have a question about the XD2 Series and is the answer not in the manual?
Questions and answers