Touchscreen Functionality When The Gc Is Controlled By An Agilent Data System - Agilent Technologies 8890 Operation Manual

4 Touchscreen Operation
Touchscreen Functionality When the GC Is
Controlled by an Agilent Data System
When an Agilent data system controls the GC, the data system defines the setpoints and runs
the samples. If configured to lock the touchscreen, the data system can prevent the changing
of setpoints.
When an Agilent data system controls the GC, the touchscreen can be used:
•
•
•
•
Stopping a run using the touchscreen or Browser Interface immediately ends the run. The data
system may retain the data already collected, but no further data is collected for that sample.
Agilent data systems may allow the next run to begin, depending on the data system and its
settings for handling errors.
Operation Manual
To view run status by selecting the Home view
To view the method settings by using the Method view
To display the last and next run times, the run time remaining, and the post-run time
remaining
To abort a run
67