Device Connection; Mounting Camera - AVer VC520 User Manual

Setup VC520

Device Connection

Camera
Camera cable
USB cable
Laptop

Mounting Camera

There are 3 ways to mount the camera – on the wall, on the ceiling, and on a table with the mount and screws included in the package.
[Warning]
1. When securing the camera mount on a wall or celling, only use hardware and materials certified to support 22 lb (10 kg) weight. For dry wall installation,
please use Sleeve-Type Hollow Wall Anchors (a.k.a. Molly Bolts).
2. If the camera mount is secured to a table, please note excessive table movement or pulling on the camera cables may cause the mount and camera to
fall. Ensure the cables and camera are secured properly.

Wall
Wall outlet
Power cable
Hub
DC 12V
Speakerphone cable
PC
1. Use the camera cable and the speakerphone cable to
connect the camera, hub, and speakerphone (refer to
diagram above).
2. Use USB cable to connect the hub to your PC/laptop
(refer to diagram above).
3. Connect the power to the hub;
Speakerphone
camera head will rotate, and the camera power
indictor will light up.
4. Install AVer PTZ app on laptop or PC that is connected
with VC520. The app can be used to adjust and
setup the parameters of the camera (refer to section of
AVer PTZ app)
5. To make a call, run your video application (Skype
Microsoft
WebEx
VC520 as your video and audio device.

Ceiling
English-3
LED will light up,
® TM TM
Lync , Google Hangouts , Cisco
® TM
, GoToMeeting , WebRTC, and etc.), select
TM
,