IBM 5291 1 Operator's Manual page 65

4-6
II
SYMPTOM:
.~
\ j
-"""""""I
I
Cursor""'-
I
)-
1
I
i
")J
CORRECTIVE ACTIONS:
The cursor is in the upper right corner of
the display screen.
1. Contact your system operator and make sure the system is operating
correctly.
2. Make sure that the work station cable between your display station and
the system is securely fastened and is not physically damaged.
3. Make sure that the Address switches on your display station are set to
the proper address. Ask your system operator for assistance. (Refer to
the IBM 5291 Display Station Setup Procedure, GA21-9408 for the Model
1 or the IBM 5291 Model 2 Display Station Setup Procedure,
GA21-9802.)
4. Make sure that the Terminator switch on your display station, and the
Terminator switches on all other display stations on your cable, are set
properly. Ask your system operator for assistance.
5. Call your service representative if the problem persists and report that
your display station is not communicating with the system.