Field Exit Key - IBM 5291 1 Operator's Manual

Field Exit Key
00 OOOOOOOOOOOOO[DJOIJ[ll]
00 IIJDOOOOOOOOOOOIDIOOO 0
00 []]JOOOOOOOOOOOO OOO§
00 []OOOOOOOOOOOCDDOOOO
00 OIl
I
ICilJOIJCQJ
The Field Exit key exits an input field. When you press this key,
blanks are inserted from the present cursor location to the end
of the field. When you press this key in a right-adjust field, the
data to the left of the cursor is shifted to the right. The vacated
positions are filled with zeros or blanks as specified by the
format and the cursor advances to the next input field. When
you press this key in a signed numeric field, a blank is inserted
in the last position of the field.
Press the Field Exit key to exit input fields that are specified by a
program as right-adjust or field exit required fields. If an error
code appears on the display, see Chapter 3 Error Codes and
Recovery Procedures for the meaning of the error and do the
recovery procedure listed.
To use the Field Exit key:
Press the
key.
Keyboard 2-13