Clear - IBM 5291 1 Operator's Manual

Clear
00 oooooooooooOO_OOJCIIJ
00 []ooooooooooolORoooO
00 CDJoooooooOOooOl:::Joo o
§
00 []OoooooooOoo[]DOoOo
00
(ill I
ICDJCIDCDJ
The Clear command erases the display (with the exception of the
cursor and the display indicators) when the display station is not
under program control (that is, with an unformatted display). A
system program can change the way this command operates, so
you can recover if you accidentally press the Clear key. On some
systems, you may have to set the Power switch to the Off
position to blank the display because some system programs
ignore the Clear command.
To use the Clear command:
1.
2.
3.
Press the
EJ
(Command) key.
Press and hold an
B
(Uppershift) key.
Press the
(]EJO
(Character Backspace) key. (The key
located directly below the word Clear on the keyboard
template.)
Keyboard 2-5