Table of Contents
Advertisement
Maintenance
At 1000 Operation Hours
At 1250 Operation Hours
At 1500 Operation Hours
After 1500 Operation Hours
(*) = When servicing these items, consult the equipment supplier.
NOTE: All service and maintenance or repairs are recommended to be completed by a GMP ASD to maintain the
warranty status of a unit. You cannot be denied emissions warranty coverage solely based on failure to complete
recommended service maintenance.
Other Maintenance Checks
Every 500 Hours
Every 1000 Hours
Annually
20
•
Change engine oil and oil filter element.
•
Inspect engine accessory drive belts.
•
Inspect fuel supply system.
•
Clean cooling system circuit.
•
Inspect and clean the starter and alternator (*).
•
Inspect valve clearance (*).
•
Inspect injection nozzle (*).
•
Change fuel filter element.
•
Clean water sedimenter element.
•
Clean electromagnetic pump filter.
•
Replace fuel filter element.
•
Clean water sedimenter element.
•
Clean electromagnetic pump filter.
•
Change engine oil and oil filter element.
•
Inspect engine accessory drive belts.
•
Inspect fuel supply system.
•
Clean positive crankcase ventilation valve.
•
Inspect injection nozzle (*).
•
Change fuel filter element.
•
Clean water sedimenter element.
•
Clean electromagnetic pump filter.
All hours-based checks and maintenance should now be performed every 250
hours.
•
Change air filter.
•
Change hydraulic oil.
•
Change hydraulic pump filter.
•
Change hydraulic breather/separator.
•
Carbon monoxide (CO) test at outlet air duct by trained service technician.
•
Inspect blower/fan hardware for condition and tightness.
Owner's Manual for Flameless Heat Cart
Advertisement
Table of Contents
