Transportation, Storage And Disposal - Husqvarna P 520D Operator's Manual

Problem
The cutting result is unsatisfactory
Transportation
• The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
• Use an approved trailer for transportation of the
product.
• Make sure that you have knowledge of local road
traffic regulations before transportation of the
product in a trailer or on roads.
To safely attach the product on a trailer for
transport
Before you attach the product, you must read and
understand the safety chapter. Refer to
8 .
WARNING: The parking brake is not
sufficient to lock the product during
transport. Attach the product tightly to the
load area.
Equipment: 4 approved straps and 4 wedge shaped
wheel blocks.
740 - 004 -
Cause
The blades are blunt. Refer to
The grass is long or wet. Refer to
The cutting deck is skew.
There is grass blockage in the cutting deck. Refer to
page 26 .
The tire pressure is different on the right and left sides. Refer to
sure on page 33 .
The pivoting wheels have different tire pressure on the right and left sides.
Refer to
The product is operated at a too high speed. Refer to
result on page 23 .
The engine speed is too low. Refer to
The drive belt slips.

Transportation, storage and disposal

Safety on page
To examine the blades on page 35 .
Technical data on page 44 .
1. Park the product in the center of the load area.
To get a good cutting result on page 23 .
To clean the product on
To get a good cutting
Technical data on page 44 .
WARNING: For transport in transport
vehicles with a cover. Make sure to let
the product become cool before you put
the product under the cover.
Tire pres-
41