Technical Specifications - Omnitronic BOB Series User Manual

9 Technical Specifications

Power supply:
Power consumption:
Amplifier power:
LF speaker:
Frequency range:
Sensitivity:
Maximum SPL:
Signal input:
Parallel output:
Satellite:
Amplifier type:
DSP:
DSP functions:
Bluetooth:
Protection:
Controls:
Indicators:
Cooling:
Enclosure:
Dimensions (L x W x H):
Weight:
Rated power:
Program power:
Components:
Frequency range:
Sensitivity:
Maximum SPL:
Impedance:
Connection:
Enclosure:
Dimensions (L x W x H):
Weight:
Specifications are subject to change without notice due to product improvements.
BOB-10A
115/230 V AC, 50/60 Hz
1060 W
LF 300 W RMS + HF 2 x 300 W RMS at 4 ohms
25 cm (10") with 50 mm voice coil
45-250 Hz
100 dB
125 dB
Combination XLR/6.3 mm jack L/R and RCA L/R
XLR L/R
Speaker L/R
Class D
48 Bit, 96 kHz sample freqency
Limiter, compressor, crossover and equalizer
Version 2.0
Soft start, short-circuit, limiter, overcurrent, overheat
Level satellite L/R, level subwoofer, DSP mode, Phase reversal
switch, Bluetooth on/off, power on/off
Fault, limit, signal, power
Convection
15 mm MDF with M20 flange (2 x), texture painting and steel grille
470 x 300 x 430 mm
16.5 kg
BOB-4
75 W RMS
150 W
10 cm speaker (4") with 25 mm voice coil
150-16000 Hz
90 dB
109 dB
16 ohms
1 x speaker and screw terminals
ABS with M8 threaded inserts, texture painting and steel grille
160 x 150 x 158 mm
1.7 kg
33 • EN