Operation; Connecting Headphones; Connecting The Antenna; Setting The Time - Sonoro Cubo Instruction Manual

Operation

The cd-radio must be plugged into an easily-accessible socket (230 V ~ 50 Hz).
Standby/switching on/switching off
The device is now in standby operation. The time display lights up. To switch cubo on and off,
use the Power button.

Connecting headphones

Headphones may be connected to the device. Connect the headphones to the connector at the
rear of the device.

Connecting an audio device

External audio devices such as an MP3 player, iPod, Laptop or similar devices may be
connected. Please use the supplied audio cable to connect an external device to the AUX-IN
socket located at the rear of the Cubo. Press the MODE button to Select AUX mode
(AUX appears on the display screen).

Connecting the antenna

Your device has a built-in VHF antenna. To select this, set the antenna selector to the
"INT" position. To improve radio reception, connect the supplied dipole antenna to the
FM antenna socket (FM-ANTENNA) and set the antenna selector to the „EXT" position.
If you have a house antenna you can connect that to the FM antenna socket. An antenna
connection cable is required, this can be obtained from specialist dealers.

Setting the time

1. Switch cubo to standby mode.
2. Press Menu, the time will flash.
3. Press Menu
4. Use the volume controls to set the desired hour.
5. Press one of the
6. Use the volume controls to set the desired minutes.
7. To save, press
8
again, the hours display will flash.
Skip buttons, the minutes display will flash.
Menu again.