Install The Interwrite Workspace Software; Connect Your Interwrite Dualboard; Connect The Video Projector; Prepare The Electronic Interwrite Pens And Install The Pen Charging Station - Interwrite DualBoard series Getting Started

Getting Started Interwrite DualBoard
TM
5

3. Install the Interwrite Workspace Software

4. Connect Your Interwrite DualBoard

Your Interwrite DualBoard must be able to communicate with the Interwrite
Workspace software just installed on your computer. This communication
link is established either by means of a physical cable (USB or serial) con-
nection, or wirelessly between the two RF communication modules—one
connected to the Interwrite DualBoard (RFCOM) and one connected to the
computer (Workspace RF Hub). The computer will automatically find the
Interwrite DualBoard, whether it is connected to it by a cable, or wirelessly
using the RFCOM and RF Hub.

5. Connect the Video Projector

6. Prepare the Electronic Interwrite Pens and
Install the Pen Charging Station
The Interactive Pen comes with its battery installed, so it is ready to use. In-
structions for replacing the battery in the Interactive Pen is on page 29. After
the optional Pen Charging Station is installed on the Interwrite DualBoard,
the rechargeable Interactive Pens must be charged before they can be used.
Instructions for attaching the Pen Charging Station to the Interwrite Dual-
Board are on page 27.

7. Calibrate Your Interwrite DualBoard

Before you begin using it, your Interwrite DualBoard needs to be calibrated
to ensure that the tip of the electronic Interwrite Pen is aligned with the
cursor on the projected image. Any time the Interwrite DualBoard or video
projector is moved, the Interwrite DualBoard must be re-calibrated.