Viewing Device Manager - Interwrite DualBoard series Getting Started

Getting Started
Your computer will automatically detect the USB devices. The blue LED on
the Workspace RF Hub will light up when it is plugged in.
Press the lighted Activation button on the RF Hub. The blue light will
5
start blinking.
You have two minutes to press the lighted Activation button on the
6
RFCOM attached to the DualBoard.
When the two RF devices have successfully paired, the blue button on the
RF Hub will stop blinking and remain a solid blue until either the computer
or the board is turned off. Pairing the RF devices is a one-time operation.
They will recognize each other when the computer and the Interwrite Dual-
Board are turned on.
Click on the to display the eInstruction Device Manager menu. Select the
eInstruction Device Manager option to display the Device Manager, where
you can manage your Interwrite Workspace devices.

Viewing Device Manager

If changing the preferences is required for the Interwrite Mobi, use the
eInstruction Device Manager. Make sure the Mobi is powered on.
Complete the following steps to view the Device Manager.
Click the eInstruction icon in the System Tray
1
on the Windows Task Bar to display the Device
Manager menu.
Select eInstruction Device Manager. The
2
eInstruction Device Manager window opens.
Use the icons or Options menu to view or
3
change the preferences on the Mobi.
Interwrite DualBoard
TM
15