Interwrite DualBoard series Getting Started page 7

Getting Started Interwrite DualBoard
TM
3
The Cable Guides are used to manage and guide dangling cables. The
optional Mounting Clips will be used only when you are mounting your
Interwrite DualBoard on the wall. Their installation is described in the Acces-
sories section on page 30.
Your Interwrite DualBoard ships with one Wall Mounting Bracket. The
Mounting Bracket is installed on the wall. The DualBoard's frame is designed
to interlock with and hang from the Wall Mounting Bracket.
You will need an electronic Interwrite Pen to use with your Interwrite Dual-
Board. You can choose from between the Interactive Pen and the recharge-
able Interactive Pen. The optional Interwrite Interactive Pen Charging
Station plugs into the board and attaches to its frame to keep the recharged
Interactive Pens close at hand. It can alternatively be mounted on the wall,
although it should be close enough to the Interwrite DualBoard's controller
so it can be plugged into the Power Connector on the top of the controller
housing. (The Pen Charging Station can be plugged directly into a wall sock-
et or power strip. The power cable with a standard power plug for such an
installation is sold separately.) If you are mounting your Interwrite DualBoard
on the wall and you are using a Pen Charging Station, you should attach it to
the Interwrite DualBoard before you mount the board.
The Interwrite Workspace CD contains the Workspace software. Interwrite
Workspace must be installed on your computer before you can complete
the installation of your Interwrite DualBoard.