Summary of Contents for Taga Harmony Diamond Series
Page 1
DIAMOND / PLATINUM SE / PLATINUM / PLATINUM SLIM / AZURE / AUDIO-VIDEO / inMOVE Passive Speaker Series* *and other series of passive speakers not listed. Instruction Manual Edition 01-18...
Page 2
Utilizing advanced materials, state of the art engineering and innovative design by an international team of professional designers position TAGA Harmony as one of the leaders in the audio industry. Thanks to unique technology, used to build our speakers and the true passion of our designers TAGA Harmony is setting the standard for sonic excellence and offers the best value in sound performance.
Contents Unpacking the speakers Placement Wall-Mounting of Satellite (S), Surround (S), Center (C), LCR and LCRS speakers Hooking up the wires Diamond - removable front logo badge Final adjustments Unpacking the speakers If you notice any damages in transportation, report it immediately to your dealer. Keep the speaker carton for future use.
Page 4
When unpacking your speakers you can choose one of two installation options: 1) with the base(plinth) or feet and spikes or with 2) the spikes only. If your speaker is provided with the the base(plinth) or feet TAGA Harmony recommends the first option.
Page 5
Unpacking the speakers FINAL STEP Carefully turn the carton with the speaker upside down. When the speaker is securely placed on the floor, remove the carton and internal packaging - your speaker is ready for placement in your room. 1 carton contains 2 pieces of floorstanding speaker [including Home Theatre packages] Remove the speakers from the carton and place them on a stable surface in a horizontal position above the floor level.
Placement Floorstanding Speakers Remarks: • Never drag the speakers to move them, as this may damage the spikes and/or the cabinet. Always lift the speakers and carry them to a new location. • The speakers have a high center of gravity and may become unstable and fall over during earthquakes, when rocked or improperly positioned.
Page 7
Home Theatre systems (as Front and Surround channels). LCR / LCRS Speakers TAGA Harmony LCR and LCRS speakers can be used in Stereo (as Left and Right speakers) and Home Theatre systems (as Front, Center and Surround channels).
Page 8
Placement See the below example of speakers placement in Home Theatre systems 5.0 / 5.1 System 6.0 / 6.1 / 7.0 / 7.1 System 1. TV or projection screen 7. Surround channel right speaker 2. Front channel left main speaker 7a.
The speaker terminal can accommodate up to 10 AWG bare speaker cables (up to14 AWG in selected models - consult your local TAGA Harmony dealer). 10 or 14 AWG speaker cables are recommended for longer connections (greater than 20 meters – 66 feet). For shorter lengths you can use 16 or 18 AWG speaker cables.
Page 10
Hooking up the wires Standard connection The right wiring diagram shows polarity connections for one channel of a stereo or home theater system. Bi-wiring connection (selected speakers only) The outer connection panel and internal dividing network (crossover) are designed so that separate sets of speaker cables can be attached to the low- frequency driver and high-frequency driver portions of this dividing network.
Break-In TAGA Harmony speakers sound great immediately after they are taken out of the carton. Start listening to music at moderate volume levels to break in the speakers. The speakers will sound even better after approximately 3-50 hours of play.
Page 12
We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony speaker cables and other installation accessories. Your product is marked with the symbol as showed on the left.
Need help?
Do you have a question about the Diamond Series and is the answer not in the manual?
Questions and answers