Download Print this page

Taga Harmony Commercial Audio TCW Series User Manual

100v in-wall & in-ceiling / on-wall / on-ceiling audio distribution speakers
Hide thumbs Also See for Commercial Audio TCW Series:

Advertisement

TCW / TOW / TBS / TOS series
100V IN-WALL & IN-CEILING / ON-WALL / ON-CEILING
AUDIO DISTRIBUTION SPEAKERS
User manual
Edition 04-2019

Advertisement

loading
Need help?

Need help?

Do you have a question about the Commercial Audio TCW Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Taga Harmony Commercial Audio TCW Series

  • Page 1 TCW / TOW / TBS / TOS series 100V IN-WALL & IN-CEILING / ON-WALL / ON-CEILING AUDIO DISTRIBUTION SPEAKERS User manual Edition 04-2019...
  • Page 2 Introduction Thank you for purchasing TAGA Harmony Speakers. TAGA Harmony installation speakers provide superior sound performance and amazing value. They utilize very rigid and strong cabinets, which minimize distortion, vibrations or resonances and specialized mounting brackets that make installation very easy.
  • Page 3: Table Of Contents

    Contents Speaker Placement Connections Speaker Mounting Painting Installing the Grille...
  • Page 4: Speaker Placement

    Place the speakers at least 60 cm (2 feet) away from corners and other surfaces which may interfere or reflect sound (like tall furniture). To add extra bass and definition to your system we recommend TAGA Harmony Custom Instal- lations or traditional subwoofers.
  • Page 5: Connections

    Connections WARNING! • This speaker has connections for different 100V power options. Select the wattage according to the application and use only one wattage option for connecting your speaker line / amplifier (never connect different wattage wires simultaneously). • This speaker should be connected only to one speaker line / amplifier. •...
  • Page 6: Speaker Mounting

    Speaker Mounting TBS SPEAKERS [100V CONNECTION] The speaker has 4 power options (check specifications on the www.tagaharmony.com website). The speaker is equipped with 5 input wires coded with colors: BLACK is common and other 4 colors are used for different transformer output power taps: BLUE is 30W, RED is 20W, YELLOW is 10W, GREEN is 5W.
  • Page 7 Speaker Mounting BLACK AMPLIFIER Ω BLACK SPEAKER WIRES SPEAKER WARNING! Make sure that an amplifier suitable to work with low-impedance speakers and compatible with the speaker impedance, is used for this mode - otherwise you may damage the speaker and/or amplifier and void your warranty. Please refer to your amplifier’s instruction manual for more information.
  • Page 8 Speaker Mounting Run the speaker cable to location where the speaker is to be installed. Leave about 30 cm (1.64 feet) of extra cable (if the speaker cable is hidden in a wall or ceiling make a hole in the center of the location of the speaker). IN-WALL &...
  • Page 9 Speaker Mounting • Remove the speaker grille by pressing the mounting screws from the back of the speaker. • With grille removed, insert the speaker into the mounting hole. • Use a screwdriver to turn the mounting screws slowly clockwise. •...
  • Page 10 Speaker Mounting ON-CEILING SPEAKERS (TBS) • Screw a ceiling hook in the ceiling where you want to mount the speaker. WARNING! Depending on the mounting surface use appropriate screws or wall anchors (ask your local dealer or installer for advice). Make sure that the hook and its installation are compatible with the weight of your speaker.
  • Page 11 Speaker Mounting TOS using U mounting bracket with horizontal and vertical regulation: - Using 4 screws install the wall mount (A) on the wall or ceiling where you want to mount the speaker (Fig. 1). WARNING! Depending on the mounting surface use appropriate screws or wall anchors (ask your local dealer or installer for advice).
  • Page 12: Painting

    Painting In the selected models the grille and the frame, may be painted to match your room decoration. In-wall/in-ceiling speakers: if you want to paint the speaker frame use the part of the template remaining after the hole has been cut out. With the grille removed, protect the speaker with this part and paint the frame.
  • Page 13 We strongly advise that your sound system is designed and installed by a licensed profes- sional engineer or designer (installer). We recommend using high quality TAGA Harmony cables and other installation accesso- ries. Your product is marked with the symbol as showed on the left.
  • Page 14 Note...
  • Page 15 Note...
  • Page 16 Note...