Admin Commands; System Commands - SystemBase Portbase PB-3010 User Manual

Portbase User Guide

5. Admin commands

Configure general information of Portbase.
- set admin name < device name > (Default: Portbase-2)
Change the device name of Portbase. When connecting to Web or Telnet, the name will be
displayed.
- set admin website <website address> (Default:
Change the web site for support information that is displayed in Web manager.
- set admin contact <contact> (Default:
Change the contact for support information that is displayed in Web manager.

6. System commands

Set username and password for Web and Telnet connection.
Restore all settings to factory default. Requires reboot for changes to take effect.
Save current configuration settings. Requires reboot for changes to take effect.
Reboot Portbase.
Update the firmware of Portbase.
(In order to update firmware via Telnet, the firmware file needs to uploaded by FTP into the
temporary memory of Portbase before running this command.)
cele mai sensibile
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ electricfilm.eu@gmail.com ▪ SUPORT TEHNIC ▪ 0788 250583
set admin [ name / website / contact ] <var ... >
set passwd
set factory
set save
set reboot
set update < firmware name >
ECHIPAMENTE PENTRU AUTOMATIZĂRI
http://www.sysbas.com
tech@sysbas.com )
)
41
41/45