SystemBase Portbase PB-3010 User Manual page 18

Portbase User Guide
Portbase's default IP address is set to 10.10.1.1. In order to connect with this address, you need to change
network configurations so that your PC can connect to the IP 10.10.1.1. Please refer to an example below,
and note that values doesn't necessarily have to be identical to the example below.
After modifying the IP address of Portbase, it may lead to difficulties if you do not remember the IP
address. To prevent such accidents, Portbase always remembers a factory default address 10.10.1.1
cele mai sensibile
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ electricfilm.eu@gmail.com ▪ SUPORT TEHNIC ▪ 0788 250583
ECHIPAMENTE PENTRU AUTOMATIZĂRI
18
18/45