Led / Reset - SystemBase Portbase PB-3010 User Manual

Portbase User Guide

2. LED / RESET

cele mai sensibile
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ electricfilm.eu@gmail.com ▪ SUPORT TEHNIC ▪ 0788 250583
<LED display status>
LED
PWR
(R )
ED
LAN
(Green)
RDY
(Green)
RS232
RS422
RS485
Green Blinking
Serial Tx/Rx
Orange Blinking
Green Blinking
LAN Tx/Rx
Orange Blinking
<Reset button features>
Operation
Pressed for less than 5 seconds
Pressed for more than 5
seconds
ECHIPAMENTE PENTRU AUTOMATIZĂRI
Status
On Power supplied to the device
No power supplied to the device
Off
Off No active network connection
On Network activated
IP Configuration
Blinking
On Normal operation
Off System error
On Serial port set to RS232 mode
Serial port set to RS422 mode
On
On Serial port set to RS485 mode
Serial data transmitted
Serial data received
10baseT connection detected & LAN data transferred
100baseT connection detected & LAN data transferred
Restart Portbase
Restore factory default settings of Portbase. The device will
automatically reboot.
Meaning
Result
14
14/45