View Commands; Network Commands - SystemBase Portbase PB-3010 User Manual

Portbase User Guide

2. View commands

- set view all : View all current settings.
- set view nw : View current network settings.
- set view serial : View current serial port settings.
- set view admin : View current admin settings.

3. Network commands

Configure general network environment and network management.
[ Network Configuration ]
- set nw mode [ static / dhcp ] (Default: static )
IP obtaining method for Portbase's network connection
- set nw ip <IP Address>
Set the current IP address Portbase is assigned to.
When line type is Static IP, manually enter an appropriate IP address.
When line type is DHCP, it is not editable.
- set nw subnet <Subnet mask>
Set the subnet mask Portbase is assigned to.
When line type is Static IP, manually enter an appropriate subnet mask.
When line type is DHCP, it is not editable.
- set nw gateway <Gateway address>
Set the default gateway Portbase is assigned to.
When line type is Static IP, manually enter an appropriate gateway.
When line type is DHCP, it is not editable.
- set nw dns<DNS address>
cele mai sensibile
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ electricfilm.eu@gmail.com ▪ SUPORT TEHNIC ▪ 0788 250583
set view [ all / nw / serial / admin ]
set nw [ mode / ip / subnet / gateway / dns / nms ] <var ... >
(Default: 192.168.1.71)
Set the DNS address of Portbase.
ECHIPAMENTE PENTRU AUTOMATIZĂRI
(Default: 255.255.255.0)
(Default: 192.168.1.1)
36
36/45