Compress IUV600S SERIES User Manual page 71

Initial Setup & Basic Operations
The system will enter the self-diagnosis mode and display the self-diagnosis menu:
1. After a short delay the screen will display

Shortly thereafter, the printer will emit a series of "beeps"

After another short delay, the screen will display
Self-Diagnosis Menu.

Shortly thereafter, the screen will display
NOTE
If one of the bed buttons (load, eject etc.) is pressed at this stage, it is likely that the screen
display will progress to
the display to
C h e c k : T e s t
2.6.8.4 Navigating to the Adjustment Menu
Follow the operation flow shown below to operate the self-diagnosis Menu and access the
Adjustment Menu.
1. Press [Forward] key or [Reverse] key in the operation panel to
scroll through the menu. Then, press [Enter] key to confirm the
menu option displayed.
The button presses required to enter the Adjustment Menu
from the start of the self-diagnosis menu are as per this flow
chart:
RAM Capacity 256Mb . Use the following operation flow shown here to return
Compress iUV600s Series User Guide
Initializing
Check : Test – this is the first menu item in the
Test:RamCapacity .
63