Troubleshooting Without Error Messages; Initial Operation Problems - Compress IUV600S SERIES User Manual

Troubleshooting

5.3 Troubleshooting Without Error Messages

This section describes the symptoms of errors without an error message as well as the check items and
recovery actions.

5.3.1 Initial Operation Problems

TABLE 5-8 CHECK ITEMS AND ACTIONS FOR INITIAL OPERATION PROBLEMS
No. Symptom
1 Machine power
cannot be turned ON
2 Abnormal LCD
operation (no
displays/garbled
characters)
3 Initial ink charge not
available
Check Item
1. Is emergency stop
switch engaged?
2. Is the power cord
connected to the
socket at the rear of
the printer?
3. Is the power cord
connected to the wall
socket for mains
power? Is the mains
power switch at wall
socket ON?
1. Check power supply
voltage (AC110VAC or
220VAC depending on
country).
2. Turn machine OFF.
Disconnect mains
power, wait 5
minutes.
Turn it ON again and
check if the same
message appears.
4. Turn machine OFF.
Disconnect mains
power, wait 5
minutes.
Turn it ON again and
check if the same
status.
137
Compress iUV600s Series User Guide
Action
Disengage the emergency
stop switch
Connect the power cord to
the socket at the rear of
the printer
Connect the power cord to
the wall socket for mains
power. Ensure mains
power switch is ON.
Contact your authorized
Compress Distributor or
Technician for further
assistance

If the display is still
abnormal: Contact
your authorized
Compress
Distributor or
Technician for
further assistance

Contact your
authorized
Compress
Distributor or
Technician for
further assistance
Reference
2.5.1
"Switching the
Printer ON" p.32
2.5.1
"Switching the
Printer ON" p.32
2.5.1
"Switching the
Printer ON" p.32
2.5.2
"Switching the
Printer OFF." p.34
2.5.1
"Switching the
Printer ON" p.32
2.5.2
"Switching the
Printer OFF." p.34
2.5.1
"Switching the
Printer ON" p.32