Konica Minolta RX-II Operating Instructions Manual page 41

Sleeve film conditions
Perforations are broken or space between the last
perforation and the film end is too small.
Tape is attached at the end.
Tape
Tape is attached at all edges.
Tape
Ends are folded.
Space between perforations is broken.
If there is enough space
between the broken
perforation and the image
area, cut the broken portion.
Less than the mark
width of DX code
If there is enough space
between the taped portion
and the image area, cut
the taped portion.
Remove the tape so as not to break the perforations.
Peel them off so that no tape remains.
If there is enough space
between the folded end and
the image area, cut the
folded end.
Fix the broken portion with tape.
(If an end of the film is broken, cut it off.)
Remedies
If there is not enough
space, cut it off
diagonally.
If there is not enough
space, peel off the
tape completely.
If there is not enough
space, straighten the
folded portion.
Straighten
17
(GB)