Hooking Up - Konica Minolta RX-II Operating Instructions Manual

Hooking Up

Mount the supplied halogen
lamp ( see page 10
to AC IN
to AC outlet
8
(GB)
The Film Scanner connects to the computer that supports the SCSI
interface.
Caution
Turn off the power for each device before attempting to make any
connections. Otherwise, electrical shock may be caused or the device may
be damaged.
Notes
• Connect the AC power cord last.
• For details about connections of computer, consult its manual as well.
• Insert the connector into the socket firmly.
• The total length of the SCSI cabling used with a single-host computer
should be less than 3 meters (10 feet).
• The length of the SCSI cabling used with a single-host computer should
be less than 1 meter (3 feet 3 inches).
Computer
). SCSI cable
(GB)
(not supplied)
to SCSI*
RX- II Film Scanner
AC power cord
(supplied)
* Connect to either of two SCSI connectors.
To remove
DIP switch
( see page 9 )
(GB)