Minute-Counter; Cancellation Of Set Data; Changing Set Data; Use Of The Oven - Smeg AP420X Instruction Manual

Instructions for the user

3.2.7 Minute-counter

The programmer can also be used as a simple minute counter.
The use of the minute-counter will not interrupt oven operation at the end
of the set time.
By pressing key
at the same time press keys
programmed count starts and the symbols
monitor.
After programming the minute-counter, the display will show the right
time. to display remaining time, press key
Wrong settings are prevented logically (e.g., any conflict between end of
cooking time and a longer time will not be accepted by the programmer).

3.2.8 Cancellation of set data

Once the programme has been set, keep the key of the function to be
cancelled pressed, while at the same time
variation keys or
cooking time by the programmer.
3.2.9 Changing the set data
The cooking data entered can be changed at any time by keeping the
function key pressed and at the same time adjusting the keys

4. USE OF THE OVEN

Before using the oven make sure that the electronic programmer displays
the symbol (see "3.2.1 Clock adjustment").
, the display shows
or
. Time cancellation will be considered as end-of-
; keep the key pressed and
. By releasing the key
and appear on the
.
is reached by means of
, the
or .
41