Yamaha HAIBIKE SDURO HardSeven SL Original Instructions Manual page 77

E-bike systems. drive unit, display unit, battery pack, battery charger
Table of Contents

Advertisement

Available languages

Available languages

English
Power supply to external devices
Power can be supplied to most external devices (e.g. various smart phones etc.) by connecting a
commercial USB cable.
[To supply power]
1. Open the USB receptacle cap of the switch.
2. Connect the USB cable to the switch and external device.
3. Turn on the power of the vehicle.
[To stop the power supply]
1. Turn off the power of the vehicle.
2. Disconnect the USB cable and put on the cap of the USB receptacle.
Do not apply unreasonable force on the USB plug or pull the USB cable.
Check that the USB plug is facing the right way and not totally out-of-position with the USB
receptacle or slanted, and make sure it is fully inserted all the way in.
Do not connect the USB receptacle and the USB plug in a wet state.
Use a USB cable that conforms to the standards.
Do not insert foreign objects into the USB receptacle unit.
Otherwise the display unit and external device may malfunction.
TIP
Power is supplied automatically when an external device is connected with the USB cable.
No power is supplied if the remaining capacity of the battery pack is low.
The power supply of the vehicle will go off and power supplied by the USB connection will also
stop if the vehicle is not operated for 5 minutes.
77

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents