Yamaha HAIBIKE SDURO HardSeven SL Original Instructions Manual page 80

English
8. BATTERY PACK AND CHARGING PROCEDURE
80
If a charging fault occurs during charging, remove the power plug of the battery
charger from the socket and wait for the battery pack/battery charger to cool.
[CHARGING THE BATTERY PACK MOUNTED ON THE
BICYCLE] (Rear carrier type)
1. Connect the power plug of the battery charger to a household power outlet.
2. Remove the lid of the battery holder cover and the cap of charging inlet from the
charging connector on the battery pack, and connect it to the charging plug on the
battery charger.
[CHARGING THE BATTERY PACK MOUNTED ON THE
BICYCLE] (Down tube type)
1. Connect the power plug of the battery charger to a household power outlet.
2. Remove the cap of charging inlet from the charging connector on the battery pack,
and connect it to the charging plug on the battery charger.
Do not connect the charging plug on the battery charger to a wet charging con-
nector on the battery pack as this can cause the battery pack to break down. Be
sure to connect the charging plug only after the charging connector on the batte-
ry pack is completely dry. Do not apply excessive force to the charging plug or
pull on the cord with the charging plug connected to the battery.
Otherwise, the plug or connector may be damaged.