will initiate to terminate the connection and send a request to rebuild the tunnel.
Other Parameters: It's used in a situation where a special parameter is required to
negotiate when establishing a tunnel. In general, this parameter can be left in blank,
unless server is requiring a special negotiation parameter.
Format -- "novj;novjcomp", between each parameter should be separated by ";".
Notice:
a. If "Add Default Route" is checked, please modify the parameters in "Keep Online".
b. If your router is in LAN, please map the port 1723 to this router.
4.7.9 VPN Status
Please understand the vocabulary of corresponding positions according to the
instructions.
VPN Type: PPTP/L2TP/IPSEC.
VPN connect status: There are two states: connected and connecting.
Tunnel local IP: After PPTP and L2TP VPN are established successfully, the VPN
server will assign a tunnel IP address to the client, but IPSEC does not.
Tunnel remote IP: After PPTP and L2TP VPN are established successfully, the VPN
server will assign a tunnel IP address to the server side, but IPSEC does not.
4.7.10 L2TP
L2TP (Layer 2 Tunneling Protocol) is a kind of VPDN technology, it's specifically used
in transferring data in layer 2 tunnel. Also means it'll encapsulate data units of layer 2(such
as PPP data) within an IP or UDP payload.
Please understand the vocabulary of corresponding positions according to the another
picture.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
37