Other Parameters - Caimore CM530-8 Series User Manual

 Mode: You can select RS232 or RS485, which defaults to RS232.
 Baud Rate: Set the communication rate when the serial port works, the range is
300~230400bps, and the default is 115200
 Data bit: Set the serial port working data bit, the default is 8.
 Parity: Set the serial port working check bit. Options to set are: NONE, EVEN, ODD,
MARK, SPACE, and default to NONE.
 Stop bit: Set the serial port work stop bit, the values can be set: 1 and 2, the default is
1.

4.6.3 Other Parameters

 Working mode: Set transmission mode, there are TCP and UDP two working modes,
the default is TCP protocol.
 Agreement: Set the working protocol to Caimore by default. If a customer needs to
customize heartbeat packages and registries, select the CUSTOM option and then
define heartbeat packages and registries in the heartbeat package definitions and
CUSTOM registries columns to enable the customer to implement CUSTOM data
transfer formats.
 Device ID: Numbering a DTU is a way for a central server to differentiate between
DTU. The ID number is fixed to 8 digits, if less than 8 digits, 0 is added in front to
make the ID full of 8 digits.
 Equipment SIM card: Set the number of SIM card to be used, and fix the number of
digits to 11. This parameter does not change the phone number in the SIM card, but
serves as a way for the central server to distinguish connected devices.
 Data frame time: The default is 200 ms. DTU packets packet rules are as follows:
1. When the data length received from the serial port exceeds the specified
buffer size (2048bytes), DTU will pack the data received and send it to the central
server.
2. When DTU device fails to receive serial data within the set "data frame
interval" time, DTU will pack the data received and send it to the central server.
The "data frame interval" time is set too small, which may cause a packet to be divided
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
29