Device; Capture Settings - Caimore CM530-8 Series User Manual

 T&H test: it's a detection for temperature and humidity. You can choose to turn it on or
off. The default setting is to turn it off. When connected to the temperature and
humidity sensor, it needs to be turned on for normal use.
 Add code: Default is 1 and cannot be changed manually.

4.5 Device

4.5.1 Capture Settings

 Format: Resolution. According to the camera resolution to select the corresponding
snapshot resolution. It supports CIF, D1, 720P, 960P, 1024P, 1080P.
 Capture sheet number: Set the number of photos to snap, ranging from 1 to 5, and
default to 1.
 Capture Interval: Set the time interval for capturing every two photos, ranging from 1
to 5, and the default is 1.
 Capture cycle: Set the capture time period to 0~60 minutes. When set to 0, this mode
of snapshot is turned off.
 Motion detection capture: Optionally turn on or off the motion detection snap.
 Timing capture:
 Timing capture: Timing snap can be turned on or off.
 Time 1-4: Set the timing of the snap.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
25