Table of Contents

Advertisement

 Destination IP: The destination IP address of static route, it can be a host or network
segment.
 Mask: Subnet mask of destination IP. If destination is a host, please set mask to
"255.255.255.255".
 Gateway: Next-hop IP of static route. If there is no need to add a gateway, please set it
to "0.0.0.0".
 Metric: Routing metric. The default value is 0.
 MTU: The maximum transmission unit. The default value is 1500.
 Interface: System interface.
 Notice: After adding a static route, if the rule doesn't appear in the routing table
below, it means this rule has not been added successfully even if there is a
successful tip. If that happens, please check your settings.

4.3 VPN

4.3.1 GRE

 Name:it is limited to use characters 0-9.a-z.A-Z,also can't repeat name.
 Remote IP :Remote public network IP
 Remote Subnet:format is 192.168.1.0/24.
 Interface IP address:The appointed virouteral interface IP address.
 Local WAN IP:IP address used to create tunnel, if it is blank, it means to use WAN
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm520-89Cm520-8cf/wCm520-8bf/w

Table of Contents