Dtu; Center Parameters; Serial Port Parameters - Caimore CM530-8 Series User Manual

: Click this button to format the storage device.
 Notice: The file in the storage device will not be able to recover after formatting, please
be careful.

4.6 DTU

4.6.1 Center Parameters

 Enable DTU: You can choose whether DTU functionality is enabled or not.
 Number of centers: Fill in the corresponding value according to the number of center
servers.
 Center IP & Port: When there is only one center server, the number of centers is set to
1. As long as the IP address and port number of the center server are filled in "main
center IP" and "port", the parameters of IP address and port of center 1-4 do not need to
be configured.
When there are x center servers, the number of centers is set to x. The parameters of
"main center IP" and "port" do not need to be configured, only the IP address and port
number of the center server need to be filled into the IP address and port of center 1-x
one by one, and x is the number of center servers

4.6.2 Serial Port Parameters

厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
28