Output Select; Video Status - FOR-A USF-106UDC-12G Operation Manual

5-1-8. Output Select

Selecting Output Select in the Video Block diagram opens the following menu screen.
Item Default
SDI 1 Operate

5-1-9. Video Status

Selecting Video Status in the Video Block diagram opens the following screen, showing video
input status in the left side and output status in the right side.
Pressing the Detail button shows the screen as shown below.
The screen shows payload ID codes and error count of the input signal.
To reset the error count, press Error Count Reset in the bottom right corner of the screen.
Setting
Bypass
Bypass: SDI 1 input signal is output from
SDI 1 without processing.
Operate
31
Description