External Metadata Output Settings; Audio - Channel B] - FOR-A FRC-9100 Operation Manual

Program Config
2 x 2 + 4 x 1
2 + 6 x 1
8 x 1
5.1
4 + 2
4 + 2 x 1
3 x 2
2 x 2 + 2 x 1
2 + 4 x 1
6 x 1
4
2 + 2
2 + 2 x 1
4 x 1
Program Config is automatically changed to 5.1, if Bit Depth is changed from 20 Bit to 16 Bit.
Note that if Program Config is changed in Channel A-1, audio signals are muted in several
seconds in Channel A-1 decoder and encoder. This is the same for Channel A-2.

6-5-1-21. External Metadata Output Settings

Selects data to be output from METADATA A OUT. (See Sec. 2-2. "Rear Panel.")
Click METADATA A OUT Sel to open a window as shown below.
Set the items to change referring to the table below and click Close.
Setting Range
Menu
(Highlighted: Default)
DEC A-1
DEC A-2
Output
Bypass
Disable

6-5-2. [AUDIO - Channel B]

Select the Channel B tab in the AUDIO page to open the [AUDIO - Channel B] page.
This page allows you to set the audio to be input into SDI 2 and output from SDI OUT 2. The
FRC-912C option is required.
Setting details are the same as for Channel A. Refer to Sec. 6-5-1 "[AUDIO - Channel A]."
Bit Depth Ch 1/2
1L / 1R
1L / 1R
1C / 2C
1L / 1R
1L / 1R
1L / 1R
1L / 1R
1L / 1R
20/16-bit 1L / 1R
1C / 2C
1L / 1R
1L / 1R
1L / 1R
1C / 2C
DEC A-1: Outputs the metadata in DEC A-1 decoder.
DEC A-2: Outputs the metadata in DEC A-2 decoder.
Bypass: Directly passes the metadata input to
METADATA A IN.
Disable: No metadata output
48
Ch 3/4 Ch 5/6
3C / 4C 5C / 6C
4C / 5C 6C / 7C
3C / 4C 5C / 6C
1C / 1LFE 1Ls / 1Rs
1C / 1S None
1C / 1S None
3L / 3R None
3C / 4C None
4C / 5C None
3C / 4C 5C / 6C
1C / 1S None
None None
None None
3C / 4C None
Descriptions
Ch 7/8
2L / 2R
2C / 3C
7C / 8C
None
2L / 2R
2C / 3C
2L / 2R
2L / 2R
2C / 3C
None
None
2L / 2R
2C / 3C
None