Converter - FOR-A USF-106UDC-12G Operation Manual

Item Default
Mode Frame
Adjust Timing
0 Clock
(Horizontal)
Adjust Timing
0 Line
(Vertical)
Freeze
Disable
Enable
Freeze
Frame
Mode

5-1-4. Converter

Selecting Converter in the Video Block diagram opens the following menu screen.
<If Converter is selected:>
Item Default
Format -
Format Follow
(*1)
Convert Input
The Output Format block parameters are available if Format Convert is set to Manual.
Setting
Selects the reference mode.
Frame: Horizontal and vertical video signal
adjustment referring to genlock signal. Not
necessary for video input and genlock to
sync.
Line: ±1/2H horizontal video signal adjustment
Frame
output with 1H delay. Synchronization
Line
necessary for video input and genlock
signal.
AVDL
AVDL: Horizontal video signal adjustment output
Line(Min)
with 1H delay. Synchronization necessary
for video input and genlock signal.
Line(Min): ±1/2H horizontal video signal
adjustment output with minimum delay.
Synchronization necessary for video input
and genlock signal.
-2750 to 2750 Sets the horizontal offset.
-563 to 563 Sets the vertical offset.
Disable
Turns freeze On/Off.
Enable
Frame
Sets the freeze mode.
Odd
This setting is ignored if progressive/no signal is
input.
Even
Setting
-
Follow Input
Manual
18
Description
Description
Specifies the converter output format.
If the specified format is not supported,
"Not Supported" is displayed, indicating
the actual output format in parenthesis.
Specifies the converter output format.
Follow Input: Converter input signal
format
Manual: Signal format specified below.