Step 1 - Assemble The Track; Step 2 - Attach The Motor - GarageAce S6 User Manual

Step 1 - Assemble the Track

Take out the track components and lay them on a clean and flat floor. Connect the four C
shape sectional rails (parts 1, 3, 4, 5) with connection sleeves (part 2) (see Fig 5). Centre the
sleeves over the rail joins.
2
1
Pull the screw rod (part 6) (Fig 6) along
with the belt to the end rail position. Put
on spring (part 8) and screw nut (part 7) on
loosely. Ensure the belt is stretched tightly
by compressing the spring (part 8) and
screwing the nut on tightly. It may need to
be tightened further later on if belt slipping
occurs.

Step 2 - Attach the Motor

A Door bracket
B Wall bracket
C Axis pin ø8x90
and split pin
D Shuttle
A
E U-brackets
F Hanging bracket
G Bent arm
H Straight arm
4
2
3
Fig 5
B
C
H
G
Fig 7
S6 Instruction Manual
5
2
6
6
Fig 6
E
F
D
8 7
TM
9