Required Tools List; Important Safety Instructions - GarageAce S6 User Manual

Required Tools List

• Electric drill
• Ladder
• Adjustable crescent spanner or ring spanner set
• Tape measure
• Flat head screwdrivers
• Philips head screwdrivers
• Pliers

Important Safety Instructions

WARNING – INCORRECT INSTALLATION CAN LEAD TO SEVERE INJURY FOLLOW ALL
INSTALLATION INSTRUCTIONS IN THIS MANUAL AND ALWAYS DO THE FOLLOWING:
1. Keep garage doors properly balanced. Have a professional service person make repairs
to cables, spring assemblies and other hardware.
2. Watch a moving door until it completely stops moving. Do not cross the path of a door
in motion, and never let children play "beat the door". Do not let children play near a
garage door when it is opening or closing.
3. Never put fingers between the sections of a garage door, and teach children to keep
their hands and fingers clear of section joints, hinges, tracks, springs and other door
parts.
4. Do not let children play with the remotes, and keep these items out of reach of
children.
5. Test the automatic reversal monthly. The garage door MUST reverse on contact with a
40mm high object (or a 50mm by 100mm board laid flat) on the floor. If the garage door
does not reverse, adjust either the force or the limit of travel, and re-test the automatic
reversal. Be careful when making adjustments because maladjustments can cause
serious injury or death.
6. Disconnect the electrical power to the opener before making any repairs or removing
the housing cover.
7. If possible, use the emergency release only when the door is closed. Be careful when
using the release with the door open because weak or broken springs may allow the
door to fall rapidly, which can cause serious injury or death.
8. Do not use the emergency release rope to open or close the door!
9. The Entrapment Warning Label should be attached in a prominent location.
10. Check the function of the opener on a monthly basis!
11. Please take good care of this manual after installation so you can refer to it for regular
safety inspections and maintenance.
6
TM
S6 Instruction Manual