Before You Start - GarageAce S6 User Manual

Before You Start

1) Read these instructions carefully.
2) Make sure your door structure is solid
and suitable to be motor driven.
3) Make sure when the door is moving,
there are no friction points.
4) The door must be properly balanced
and must be easily lowered and raised
by hand.
2
Refer to Fig. 2 for recommended installation.
1) Track
2) 24V DC flash light (optional)
3) Wall switch
4) Photo beam (optional)
5) Power socket
6) Door opener
Maintain a minimum gap of 30mm between
the top panel and the bottom of rail
(Fig 3). Make sure the track is horizontal
and vertical to the shaft. Make sure the
connection of hanging bracket F and ceiling
is firm enough (Fig. 4).
WARNING: Make sure the opener is
attached to a solid ceiling and not to
plasterboard. Failure to have a safe and
secure fixing will lead to opener falling,
and cause serious personsal and/or
property damage.
8
4
TM
S6 Instruction Manual
Fig 1
3
1
4
Fig 2
30mm Min
Fig 3
400mm Min
Fig 4
Sectional
Overhead door
H max. 2600mm
Tilt
Overhead door
H max. 2600mm
5
6
F