DRYER OPTION - OPERATION AND MAINTENANCE
Figure 4b
DISASSEMBLING THE UNIT
The unit has been designed and constructed to guarantee
continuous operation��
The long service life of some components such as the fan
and compressor depends on good maintenance��
The unit must only be disassembled by a refrigerant
specialist��
80448418 Rev.C
RELEASED 20/Jul/2016 17:56:55 GMT
Refrigerant liquid and lubricating oil inside the
refrigeration circuit must be recovered in compliance
with current norms in the country where the machine is
installed��
RECYCLING DISASSEMBLY
Frame and panels
Heat exchanger (cooler)
Pipes
Drainage system
Heat exchanger insulation EPS (polystyrene sintered)
Pipe insulation
Compressor
Condenser
Refrigerant
Valve
Electrical cable
REFRIGERANT LEAKS IN THE REFRIGERATION
CIRCUIT
The unit is dispatched in perfect working order, already
charged��
Refrigerant leaks may be identified by tripping of the
compressor overload protector (SK)��
IF A LEAK IS DETECTED IN THE REFRIGERANT CIRCUIT,
SEEK TECHNICAL ASSISTANCE��
REFRIGERANT CHARGING
THIS OPERATION MUST ONLY BE PERFORMED BY A
REFRIGERANT SPECIALIST��
WHEN REPAIRING THE REFRIGERANT CIRCUIT, COLLECT
ALL THE REFRIGERANT IN A CONTAINER AND DISPOSE OF
IT IN THE APPROPRIATE MANNER
CHARACTERISTICS OF REFRIGERANT R134A
In normal temperature and pressure conditions the above
refrigerant is a colorless, class A1/A1 gas with TVL value of
1000ppm (ASHRAE classification)��
If a refrigerant leak occurs, thoroughly air the room before
commencing work��
Steel / epoxy resin polyes-
ter
Copper
Copper
Polyamide
Gum synthetic
Steel / copper / aluminium
/ oil
Steel / copper / aluminium
R134a
Brass
Copper / PVC
1