Table of Contents
Advertisement
numbers.
FLASH FUNCTION
•
Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to
make a new call.
OUT OF RANGE WARNING
•
The handset and base unit communicate up to a certain maximum range. The distance
can be affected by weather, power lines, or even other cordless telephones.
•
If you far away from the base unit, the handset will show "
display to warn you that bit error rate is too high for proper communication between the
handset and the base unit.
•
When you hear no voice and see the "
to the base unit. Otherwise, the call will automatically cut off after 30 seconds.
LOW BATTERY WARNING
•
When the handset battery voltage level is low, the handset LCD display shows "
".
LOW!
•
Return the handset on the base cradle or charge cradle for charging.
TELEPHONE KEYPAD CHARACTERS
The TELEPHONE KEYPAD buttons (0~9) are used to enter characters using multi-tap input
when entering names. Press the appropriate KEYPAD button consecutively to get the following
characters.
Keypad Button
1
2
3
4
5
6
7
8
9
Multi-tap example: If you want to enter the character "C", press the "2" KEYPAD button, the
first character displayed will be "A". Press the "2" button again within 1 second to display "B",
and press again within 1 second to display the letter "C". To enter the next character, press the
appropriate button. If, however, the next character is on the same button as the previous
character, you will need to wait for 2 second until the cursor shifts. If you want to change any
character, you can go backward by pressing DEL button to erase the inputted characters one
by one.
SAVING IN THE PHONEBOOK
All phonebook operation is the same on handset and base unit, they phonebook memories are
independently stored in their own non-volatile memories.
1.
Press the MEM button.
2.
Press UP/DOWN button to select location, or enter 2 numeric digits to select location
directly (01~20).
3.
Press MENU to confirm editing in the current location.
4.
Use the TELEPHONE KEYPAD buttons (0-9) to enter the name by multi-tap input. You
OUT OF RANGE
" display, you should move closer
Multi-tap Characters
Spc _ * !
A B C (
D E F )
G H I $
J K L /
M N O ;
P Q R S
T U V ?
W X Y Z
OUT OF RANGE
" on the LCD
BATTERY
Advertisement
Table of Contents
