Bell Phones Excursion 35818 Manual page 15

mode.
1. During Standby mode, press MENU button;
2. Press DOWN button until "
3. Press MENU button;
4. Press UP or DOWN button to select the dial signaling mode you desire (Tone is the preset
mode);
5. Press MENU button to save the setting;
6. Press BACK button to go back to Standby mode.
NOTE: tone/pulse signaling mode is set independently in each handset and base. If call is
transferred to another handset, the signaling mode will still kept until the call is ended.
AUTO ANSWER ON/OFF (applicable to handset only)
This telephone allows you to enable or disable the handset to auto answer incoming call when
is picked up from cradle during ringing.
1. During Standby mode, press MENU button;
2. Press DOWN button until "
3. Press MENU button;
4. Press UP or DOWN button to select the auto answer enable/disable option you desire
(Disable is the preset option);
5. Press MENU button to save the setting;
6. Press BACK button to go back to Standby mode.
EDIT USERNAME (applicable to handset only)
This telephone allows you to input your username which to be displayed during Standby mode
and paging.
1. During Standby mode, press MENU button;
2. Press DOWN button until "
3. Press MENU button;
4. Press numeric keypad to enter username by multi-tap input (max. 15characters);
5. Press MENU button to save the input;
6. Press BACK button to go back to Standby mode.
NOTE: for the operation of multi-tap input, please refer to Telephone Keypad Characters
section for more detail.
TAD RING COUNT (applicable to base unit only)
This TAD offers 3 ring count options for user to select, they are 3 rings, 5 rings, toll save.
1. During Standby mode, press MENU button;
2. Press DOWN button until "
3. Press MENU button;
4. Press UP or DOWN button to select your desired no. of rings to answer call by TAD (TOLL
SAVE is the preset option);
5. Press MENU button to save the setting;
6. Press BACK button to go back to Standby mode.
NOTE: When TOLL SAVE options is selected, the TAD will answer the call after 3 rings if there
is new message(s) in store while it will answer the call after 5 rings if there is no new message
in store.
TAD DAY/TIME (applicable to base unit only)
This TAD allows you to set the day and time running in the unit and this information is stamp to
the voice message recorded.
1. During Standby mode, press MENU button;
2. Press DOWN button until "
3. Press MENU button;
4. Press UP or DOWN button to select the day of week and then press MENU to confirm;
TONE/PULSE " option is pointed by the pointer;
AUTO ANSWER " option is pointed by the pointer;
EDIT USERNAME " option is pointed by the pointer;
" option is pointed by the pointer;
TAD RING COUNT
TAD DAY/TIME " option is pointed by the pointer;