PremierOne MUV7-100DR Installation & Maintenance Instructions Manual

MUV7-100DR
MultiVoltage UVC System
Installation & Maintenance Instructions

UNPACKING THE UNIT

Each unit is shipped with the germicidal lamps placed in a box with
protective packaging. When handling lamps take care to not touch
the glass portion of the lamp with bare hands. Oils from the hands
can cause "hot spots" which reduce lamp life. Handle by the end
caps or use a soft cloth. If you accidentally touch a lamp, use the
alcohol pad included or clean it using a soft cloth dampened with
rubbing alcohol. The lamp is fragile and proper care must be taken
when removing from packaging.
The following parts are included:
• Power Supply
• Two (2) Germicidal Twin H Lamp
(packed in lamp box)
• Twelve (12) Sheet Metal Screws

IMPORTANT: SAFETY INSTRUCTIONS

When installing and using this electrical equipment, basic safety precautions
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Always be sure the unit is unplugged during installation or service procedures.
3. The ultraviolet light produced by the UV lamp is harmful to your eyes. Do not look directly at
the lamp. Should it become necessary to view the lamp, use UV-protected sunglasses.
Lors de l'installation et de l'utilisation de cet équipement, des précautions devront être suivies.
1- Lire et suivre les étapes attentivement.
2- Assurez vous de toujours débrancher avant l installation ou le service.
3- Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire,
veuillez porter les lunettes de soleil contre les rayons U.V.
Important: Instructions de securité
should always be followed including the following:
• Four (4) Caution Labels
• Strain Relief Connector
• Alcohol Pad for Cleaning Lamps
• Installation & Maintenance Instructions