Table of Contents
Advertisement
Quick Links
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
Latch Head
Battery Powered Crimp
Tool Kit 1901343- [ ]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. ADJUSTMENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safeguards are designed into this application equipment to protect operators and
maintenance personnel from most hazards during equipment operation. However,
certain safety precautions must be taken by the operator and repair personnel to
avoid personal injury, as well as damage to the equipment. For best results,
application equipment must be operated in a dry, dust- -free environment. Do not
operate equipment in a gaseous or hazardous environment.
Carefully observe the following safety precautions before and during operation of
the equipment:
D ALWAYS wear appropriate ear protection.
D ALWAYS wear appropriate eye protection.
D ALWAYS wear approved eye protection when operating powered equipment.
D ALWAYS keep guard(s) in place during normal operation.
D NEVER wear loose clothing or jewelry that may catch in moving parts of the
application equipment.
D NEVER insert hands into installed application equipment.
D NEVER alter, modify, or misuse the application equipment.
TOOLING ASSISTANCE CENTER
1--800--722--1111
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
Customer Manual
409- - 10070
13 JUL 11 Rev D
2
5
5
5
5
6
6
6
7
8
8
8
8
8
8
8
1 of 8
LOC B
Advertisement
Table of Contents
Related Manuals for TE Connectivity 1901343 Series
Summary of Contents for TE Connectivity 1901343 Series
-
Page 1: Table Of Contents
All Rights Reserved 1--800--722--1111 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners. -
Page 2: Safety Precautions Read This First
409- 10070 SAFETY PRECAUTIONS - - IMPORTANT SAFETY INFORMATION DANGER CAUTION DANGER CAUTION DANGER DANGER CAUTION DANGER CAUTION This unit should only be used by trained DANGER competent personnel. Read and understand the entire manual before using the equipment. NOTE: Keep all decals clean and legible, and replace when necessary. - Page 3 409- 10070 TOOLING ASSISTANCE CENTER CALL TOLL FREE 1- 800- 722- 1111 (CONTINENTAL UNITED STATES AND PUERTO RICO ONLY) The Tooling Assistance Center offers a means of providing technical assistance when required. In addition, Field Service Specialists are available to provide assistance in the adjustment or repair of the application equipment when problems arise which your maintenance personnel are unable to correct.
- Page 4 409- 10070 Battery Lock Battery Powered Crimp Tool Release Switch (1901343- - 1 and - - 2 Only) Yoke Battery Cartridge 1725839- - 1 Latch Head Adapter Assembly Latch Arm Locking Flange CRIMPING TOOL (with Battery Installed) Length 356 mm [14 In.] Width 60 mm [2 3/8 In.] Depth...
-
Page 5: Introduction
2. Thoroughly inspect each component for evidence of damage that may have occurred in transit. If any of the components are damaged, file a claim against the carrier and notify TE Connectivity immediately. 3. Keep this manual and all drawings and product samples with the tool for the benefit of operation and maintenance personnel. -
Page 6: Removal Of Die Assemblies
409- 10070 To avoid damage to the dies, be sure that the moving and stationary dies are properly oriented. CAUTION 8. Replace the battery and activate the power unit to allow the ram to return to the “down” position. 9. Pivot the yoke toward the latch arm until the locking flange secures the latch arm to the yoke. Always make sure the yoke and latch arm are secured by the locking flange before cycling the tool to crimp the CAUTION product. -
Page 7: Crimping
409- 10070 To remove the battery, disengage the battery lock by applying pressure on the lock toward the bottom of the tool and slide the battery away from the tool. Always dispose of the old battery pack in an environmentally- - responsible way, in accordance with local waste DANGER regulations. -
Page 8: Preventive Maintenance
409- 10070 9. Inspect the crimp according to the crimping procedures for the terminals provided in TE Instruction Sheets 408--10050 (SOLISTRAND Terminals and Splices); or 408--10051 (TERMINYL, AMPOWER, PLASTI--GRIP Terminals and Splices). 5. PREVENTIVE MAINTENANCE 5.1. Daily Maintenance Perform the following maintenance on a daily basis: 1.