Stihl SR 440 Instruction Manual page 47

Hide thumbs Also See for SR 440:
Table of Contents

Advertisement

Available languages

Available languages

L
H
LA
Press the manual fuel pump
N
bulb (3) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
4
Press in the choke knob (4) and turn
N
it to c.
Warm engine (warm start)
4
Press in the choke knob (4) and turn
N
it to o.
Also use this setting if the engine has
been running but is still cold.
SR 440
Cranking
Place the unit securely on the
N
ground and make sure that
bystanders are well clear of the
nozzle outlet.
Make sure you have a firm footing:
N
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
Pull the starter grip slowly with your
N
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
Continue cranking until the engine
N
runs.
As soon as the engine runs
4
Pull the throttle trigger – the choke
N
knob (4) automatically returns to the
run position (e).
At very low outside temperatures
Open throttle slightly – warm up the
N
engine for a short period.
English
45

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents