Stihl SR 440 Instruction Manual page 42

English
4 3 2
Push the ring seal (3) (wide lip
N
facing left) onto the stub on the
blower tube (2).
Push the pleated hose (4) over the
N
ring seal (3).
1
4
5
Push the hose clamp (1) onto the
N
pleated hose (4).
Line up the marks on the hose
N
clamp (1) and blower tube (2) – as
shown.
Secure the hose clamp (1) with the
N
screw (5) – the blower tube (2) must
still rotate.
40
Fitting the Pleated Hose on the Elbow
2
Push narrow hose clamp (1), marks
N
facing left, onto the elbow (2).
Push the pleated hose (3) onto the
N
elbow (2).
2
2
4
Push the hose clamp (1) onto the
N
pleated hose (3).
Line up the marks on the hose
N
clamp (1) and elbow (2) – as shown.
Secure the hose clamp (1) with the
N
screw (4).
1
3
1
3
4
2
1
Adjusting and Securing the Control
Handle
Put the machine on your back and
N
adjust the harness – see "Harness".
a
1
Slide the control handle (1) along
N
the tube to the most comfortable
position – distance between nozzle
outlet (2) and the control handle (1)
must be at least 500 mm ('a').
1
Secure the control handle (1) with
N
the screw (3).
2
3
SR 440